Driveway sealcoating
Residential asphalt sealing with the edges cut cleanly at sidewalks, garage aprons, and curbs, and the coverage carried properly through the turn-around and the first few feet at the street.
Serving Memphis, Tennessee & surrounding areas
Mon–Fri 8am–6pm · Sat 9am–2pm
Sealcoating in Bartlett, TN
Asphalt sealing, crack repair, and striping for Bartlett driveways and business lots, scheduled around your access and cured on a timeline we tell you up front.
Pavement care in Bartlett
Sealcoat is a wear layer, so the useful question on a Bartlett property is what the surface is already doing before anything gets applied. Pavement that sheds water and still looks dark takes a coat well. Pavement that has gone gray, feels rough underfoot, or drinks a hose down instead of beading it is telling you the binder has oxidized, and that is the surface a seal coat is meant for.
The asphalt gets read first, and we say what it needs. Where cracks are open or spreading, those get addressed before coating, because a film laid over a moving crack reappears along that line within a season. Where the base has gone soft and the surface flexes under load, that is a repair conversation rather than a sealing one, and we will say so rather than sell a coat that cannot hold.
What the work covers
Each of these runs the same way here as it does anywhere else we work: we read the surface, write the scope, and tell you what to stay off and for how long.
Residential asphalt sealing with the edges cut cleanly at sidewalks, garage aprons, and curbs, and the coverage carried properly through the turn-around and the first few feet at the street.
Lot work staged so you keep usable parking, with drive lanes and entrance areas treated for the wear they actually take rather than coated at one uniform rate.
Cracks cleaned back to sound asphalt and filled with a flexible sealant, so the repair moves with the pavement instead of splitting along the same line again.
Failed areas cut back to solid material and rebuilt at proper thickness, which is the fix when cracking has gone interconnected and the area feels weak under a vehicle.
Stalls, directional arrows, stop bars, and accessible spaces laid out so they read clearly to a driver at parking-lot speed, repainted after sealing rather than before.
Before we quote
A walkthrough takes a few minutes and settles most of the scope. These are the things that change the number and the schedule.
How the job runs
Four stages, in this order, with the cure window confirmed before anyone leaves.
We look at the surface with you, note what needs repair before coating, and put the scope in writing so there is no argument later about what was included.
Vehicles and anything sitting on the asphalt come off, then the surface is cleaned, because sealer over dirt or loose aggregate releases early no matter how well it goes on.
Cracks get cleaned and filled, and any patching happens now, so the coating goes onto a surface that is actually ready to hold it.
Sealer is applied with the edges cut by hand, then we tell you when foot traffic is safe and when vehicles can return, based on the day's temperature and the site's airflow.
Condition-based pricing
Sealcoating in the Memphis area typically ranges from about $0.20 to $0.45 per square foot. A standard single-car driveway often lands around $250 to $450, while larger driveways or small lots commonly run $500 to $1,200+ depending on layout and condition.
Crack sealing, patching, paving, and striping are quoted per project rather than against that range, because they are measured differently and depend on how much of the surface is involved. We walk the property, then put a written quote in front of you.
Recent work
Photographs from recent sealcoating, repair, and striping jobs in the Memphis area.
Bartlett questions
Most of what people ask comes down to timing, prep, and whether their pavement is a candidate at all.
We work in Bartlett regularly. The crew and equipment are based at our Memphis location and travel out to the property, which is how the scheduling and the pricing both work.
A surface that has gone gray and rough but still sheds water is usually a sealing candidate. If there is widespread cracking, crumbling at the edges, or a spot that gives under a vehicle, repairs come first so the coating is not applied over something that is already failing.
Plan on at least a full day before vehicles return, and longer when the weather is humid or cool. We give you a specific window based on the day's conditions and how much shade and airflow the area gets.
Usually, yes. Lots can be phased by section or by row so you keep entrances and some parking open, and after-hours or weekend work is often possible where business hours make daytime access impractical.
The pavement cleared of vehicles and anything sitting on it, plus access to the whole area being coated. If there are gates or a shared drive, we sort that out ahead of time.
Yes, residential driveways and commercial asphalt both. Commercial sites generally need more staging detail so vehicles and people can move safely while the coating cures.
Next step
Tell us what the surface is doing and we will walk it, say what it needs, and put the number in writing before any work is scheduled.
Request a quote
Send the size and condition and we will come look at it, then put a written scope and price in front of you.